02130nam a22001577a 4500999001700000100007200017245013600089260003000225300001200255500144400267700003701711856003301748942001101781952009001792952009001882 c56120d56117 aMemon, Muneeb Ayouba14MCE04aSupervisor Prof. Dr. Noor Ahmed Memon aExperimental Study To Investigate The Strength Properties & Unit Weight Of No-Fines Concrete With Un-Crushed Aggregate (ME Thesis) aNawabshah:bQUEST,c2016. a112P, : aABSTRACT The Self weight of the structures consists major portion of their overall weight. The use of lightweight concrete not only reduces the weight but a l so results in the reduction i n the sections of the structural elements resulting in the economy. The concrete without fine aggregates is term ed as 'no-fines concrete', which i s one of the types of the lightweight concrete family. Normally no-fines concrete (NFC) i s produced with the crushed coarse aggregate of uniform gradation. Th is study is aims to investigate experimentally the effect of using uncrushed coarse aggregate on unit weight (density) and strength properties of no-fines concrete. The strength properties investigated are compressive strength, spilt cylinder tensile strength and flexural strength (Modul us of rupture). Four gradations of uncrushed coarse aggregates ranging between pacific maxim um and minimum size are used i.e. 5.5mm-4.75m m, 10mm-4.75mm, 20mm-4 .75mm and 25mm- 4.75mm Fixed cement: aggregate ratio I :6 is adopted for No-fines concrete while l :2:4 ratio is adopted for Normal concrete. The water cement ratio is maintained at a fixed value 0.4 for No-fines concrete and 0.5 for normal concrete thought the study. The results values are compared i n terms of effect of gradation of uncrushed coarse aggregates in no- fines concrete itself and normal concrete with same gradation of uncrushed coarse aggregates.  aDepartment Of Civil Engineering uhttps://tinyurl.com/ppd392w5 cTHESIS 00104070aRESEARCHbRESEARCHd2016-11-28l0pMP/10-107r2016-11-28 00:00:00yTHESIS 00104070aRESEARCHbRESEARCHd2018-10-02l0pMP/28-323r2018-10-02 00:00:00yTHESIS